Hydrogen Generator & Plants

AMMONIA CRACKER

This is the cheapest method to produce Hydrogen gas for various industrial uses. In this system , Hydrogen gas is produced by dissociation of commercial Ammonia(NH3) . The dissociation of Ammonia gas take place at a temperature of 875 - 920°C in presence of Nickel Catalyst. Hydrogen and Nitrogen are generated in a cost effective way in a volume ratio of 3 : 1 or in a weight ratio of 14 : 3.

Cracking of ammonia is endothermic process in presence of Nickel Catalyst completes the reaction at around 875 to 900OC. Ammonia is passed through tubular retort filled with Nickel catalyst. The retort is fitted in an electrically heated furnace, which supplies the heat of reaction.

875O C

2 NH3 N2 + 3H2

Nickel Catalyst

The NH3 is coming from bottles or from an ammonia tank. The ammonia gas is pre-heated in a heat exchanger and vaporizer and then cracked in the main furnace unit. As a result of complete dissociation into hydrogen and nitrogen, very little undissociated ammonia remains and the dew point temperature of the resulting gas is very low (below -30°C).

Technical Certitude :

01 Hydrogen Flow :-

Hydrogen cracked gas is generated from 1 Nm3/hr to 500 Nm3/hr in a single furnace

02. Hydrogen gas Purity : -

It produced standard cracked gas mixture in a ratio of 75% H2 + 25% N2. It can be further purified up to 99% hydrogen by gas purifiers in downstream depends on customer requirement.

03 Cracked gas Pressure :-

Cracked gas can be generate at 4.5 to 5.0 Kg/cm2 g pressure by our generator directly without any booster. We also offer integrated booster on demand of customer for further boost the cracked gas.

04 Dew Point :-

We design our system to deliver dry gas up to (-) 40 to (-) 80°C on demand and requirement of customer. We offer online measuring instrument to measure dryness of gas.

PEM HYDROGEN GENERATORS :

85% of the energy consumed globally is provided by fossil fuels, namely coal, oil and natural gas. Consuming fossil fuels produces green house gases and other byproducts, causing climate change and air pollution. The growing demand of energies requires a rapid shift from fossil fuel to renewable energy sources such as wind, solar, biomass etc. In this context, Hydrogen is proposed as a secondary source of energy.

PEM (Proton Exchange Membrane) water electrolysis system / process is an endothermic process and electricity is applied as the energy source. The water electrolysis reaction is thermodynamically possible at potential higher than 1.23V vs RHE( Reversible Hydrogen Electrode). The thermoneutral potential at which the cell can operate adiabatically is 1.48V vs RHE. The PEM Hydrogen generators operate at potential over 1.48V vs RHE and heat is generated by the reaction.

Application : .

•Flat glass industry

•Metal industry

•Food industry

•Semiconductor industry

•Electronics industry

•Chemical industry

•Dimond Industries

WATER ELECTROLYSIS HYDROGEN GENERATORS

We are a leading supplier of hydrogen generators ( Hygear -Netherlands) in India. We produce hydrogen through alkaline electrolysis technology. This is the most widely applied and proven technology available today and therefore offers a safer and more reliable alternative to conventional hydrogen supply by trailers. Our offered capacities range from 10Nm3/hr TO 1000 Nm3/hr

Applications

•Flat glass industry

•Metal industry

•Food industry

•Semiconductor industry

•Electronics industry

•Chemical industry

•Hydrogen filling stations